Knowledge Base

Follow

Revelator Dynamic: Using Revelator Dynamic for Zoom

Published March 21, 2022

 

PLEASE NOTE: Install Universal Control for access to the mixer, firmware updates, and extended preset editing. Revelator Dynamic Downloads

 

Using your Revelator Dynamic with Zoom will make you sound as professional and as clear as possible. Please see the following as regards getting up and going.

 

1. Launch Zoom, and click the cogwheel icon to enter Zoom Preferences.

 

Screenshot_2022-03-31_at_17.19.27.png

 

 

 

2. Click the “Audio” tab.

 

Screenshot_2022-03-31_at_17.20.47.png

 

 

Windows:

  • Set Speaker to Playback L/R (Revelator Dynamic)
  • Set Microphone to Mic 1/2 (Revelator Dynamic)
  • Uncheck the box marked “Automatically adjust microphone volume”

 

Screenshot_2022-03-31_at_17.23.11.png

 

 

Please Note: When this option is selected, the sliders in Zoom will not have any effect on the Speaker output or Microphone Input gain, as these are controlled by the Revelator Dynamic itself—either by the onboard controls and/or through the Universal Control software.

 

 

 

MacOS:

  • Set Speaker to Revelator Dynamic
  • Set Microphone to Revelator Dynamic
  • Uncheck the box marked “Automatically adjust microphone volume”

 

Screenshot_2022-04-01_at_14.36.27.png

 

 

 

Please Note: When this option is selected, the sliders in Zoom will not have any effect on the Speaker output or Microphone Input gain, as these are controlled by the Revelator Dynamic itself—either by the onboard controls and/or through the Universal Control software. Mac users will see that the sliders do not move and will snap back to the zero position indicating that these controls in Zoom are disabled.

 

 

3. Scroll down and click on Advanced.

 

 

Screenshot_2022-04-01_at_14.37.21.png

 

4. In Zoom’s Advanced Audio settings menu, please ensure Echo Cancellation is set to Auto.

 

 

Screenshot_2022-04-01_at_14.38.34.png

 

 

 

Pro Tip: On PC if you need to switch your audio device to Revelator Dynamic while in a meeting, select the arrow next to the Mute Button to select your audio device list.

 

 

 

Screenshot_2022-04-01_at_14.39.15.png

 

 

 

On macOS users running Revelator Dynamic in Single Mode will see Revelator Dynamic appear in Zoom’s Microphone and Speaker selections as follows:

 

 

Screenshot_2022-04-01_at_14.40.19.png

 

All Windows users and Mac users running Revelator Dynamic in Multi-Mode will see Revelator Dynamic appear in a list similar to this:

 

 

Screenshot_2022-04-01_at_14.41.53.png

 

 

 

You can use the software mixer in Universal Control to control the levels of your Mic and the audio coming from Zoom. 

 

 

 

Screenshot_2022-04-20_at_15.19.38.png

 

 

That's it, you now ready to Zoom like a boss!

 

==================================================================

Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus.com/Support for further assistance.

>How to create a support ticket<

 

Was this article helpful?
1 out of 1 found this helpful
Powered by Zendesk