Knowledge Base


StudioLive Series III - 64S Outputting Flex-mixes 17-32 over AVB to a 32R in Stagebox mode

Reviewed April 20, 2021

Before proceeding please be sure your firmware is updated on your StudioLive and that you are using the latest Universal Control:

StudioLive Series III Console - Firmware Update

StudioLive Series III Rack mixer - Firmware Update

Universal Control:



When using your StudioLive 64S with a StudioLive 32R mixer in "Stagebox" mode,

the 64S's Flexmixes 1-16 will automatically mirror to the 16 Aux outputs of the 32R.


However, if you would like to change your setup to have the 64S's Flexmixes 17-32 mirror to the 32R instead:

First, put the 32R in "Stagebox" mode from the 64S:

  1. Press [Home] on the FOH StudioLive 64S
  2. Touch "Audio Routing" on screen
  3. Touch "Digital Patching"
  4. Touch "AVB Sends"
  5. Assign AVB Send 41-56 to "Mix 17 - 32" instead of Mixes 1-16.

By default the "Stageboxed" 32R will listen to AVB Sends 41-56- these are usually sourced by Flex-mixes 1-16 of the FOH Console.

By rearranging the AVB Sends to be sourced from Mix 17-32 instead you should then have mixes 17-32 pass out the back of the 32R.


Please note: You will need to leave the Input-type for Mixes 17-32 set to [Analog] input-type in the FAT Channel Control section.


Users who would like to use two (2) StudioLive 32R Rack-mixers should review this article on arranging AVB I/O routing for the second connected 32R to the 64S: 

Series III: Connecting the StudioLive 64S with two 32Rs using AVB



Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus for further assistance.

>How to create a support ticket<

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk