Knowledge Base

Follow

StudioLive Series III - How do I Input audio from the StudioLive to my OBS Scene with USB?

Updated Dec 1, 2020

Before continuing you will need to be sure you are using the latest Universal Control and Firmware for your StudioLive:

StudioLive Series III Console - Firmware Update

StudioLive Series III Rack mixer - Firmware Update

Universal Control can be downloaded here:

https://www.presonus.com/products/UC-Surface/downloads

---------------------------------------

 

Setting up the USB Routing from the StudioLive:

First, you will need to assign USB Sends 1 and 2 to your Output Flex-Mix of your choice.

Here is how to assign your USB Sends 1/2 from the StudioLive TO the Computer:

StudioLive Series III - How to setup my StudioLive for Streaming Online (USB)

 

Setting up the Input Source in OBS:

Then, in OBS,

  • Choose your Scene,
  • Under "Sources" add an Audio Input Capture device.
  • Choose the StudioLive Series III or StudioLive WDM 1/2

 

SL-OBS-Setup.gif

 

We also recommend this video for further information on arranging Audio with OBS:

 

====================================================================

Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus.com/Support for further assistance.

>How to create a support ticket<

 

 

Was this article helpful?
1 out of 2 found this helpful
Powered by Zendesk