Knowledge Base

Follow

StudioLive 16.0.2 - How to Factory Reset (Firewire or USB) with Universal Control 3.3+

Updated: October 9, 2020

 

PLEASE NOTE: You will need to backup your scenes/presets before proceeding if you want to keep them. Otherwise, they will be erased during the Reset.

https://support.presonus.com/hc/en-us/articles/115001731003-UC-Surface-2-0-Scene-Save-Recall

 

To reset your StudioLive 16.0.2 USB (or Firewire version):

 

>Open Universal Control (v. 3.3.0+)

Found here: https://www.presonus.com/products/StudioLive-16.0.2-USB/downloads

 

>Click on your StudioLive 16.0.2 USB

Screen_Shot_2020-10-07_at_4.06.59_PM.png

 

>Click the Settings "Gear" in the top-right corner

Screen_Shot_2020-10-07_at_4.07.35_PM.png

 

>Click "Restore Factory Presets"

Screen_Shot_2020-10-07_at_4.08.00_PM.png

 

---------------------------------

For further information regarding the Factory Reset and backup process:


Please see Section 5.7.1.4/Page 31
Link: https://pae-web.presonusmusic.com/downloads/products/pdf/StudioLive1602SoftwareLibrary_ReferenceManual_EN_10082017.pdf

Please ensure to back up your mixer and/or save you current settings.
Link: https://support.presonus.com/hc/en-us/articles/115001731003-UC-Surface-2-0-Scene-Save-Recall

Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus.com/Support for further assistance.

>How to create a support ticket<

Was this article helpful?
1 out of 1 found this helpful
Powered by Zendesk