Knowledge Base


Faderport 8: Using a UAD device with "Console" installed

Published March 20, 2018


PLEASE NOTE:  This may no longer be an issue with current versions of UAD Console


It has come to our attention that the program called "Console" from UAD will grab your MIDI devices on a Windows machine and not allow them to work in any DAW.  The ports for your Faderport 8 will show up in your DAW, but the "send to" ports will not work.  They will fail silently.  If you are using a UAD device and you have "Console" installed, you will want to open Console in your startup tray and go into your Console Settings>MIDI panel and disable the Faderport 8.  Once you have set the device value to "none," you should be able to use the device in your DAW. 

Here is a link to this information on UAD's web site.  



Please contact PreSonus Technical Support by creating a Support Ticket at for further assistance.

>How to create a support ticket<




Was this article helpful?
1 out of 2 found this helpful
Powered by Zendesk