Knowledge Base

Published Mar, 2025

Due to changes on iOS, your device running QMix-UC can not take the devices name to populate on Universal Control to assign AUX permissions. This has been addressed by allowing QMix-UC to give the connected device a "Nickname". 

Please ensure you are running the latest version of firmware, Universal Control and QMix-UC version. 

• StudioLive Series III firmware should be v2.8.2.103375
• Universal Control v4.6.1.104762
• QMix-UC version should be v3.4.0.10446

Please ensure you have correctly setup your wireless network

Link: https://support.presonus.com/hc/en-us/articles/360028808611-Wirelessly-Controlling-a-PreSonus-StudioLive-Series-III-Mixer

Step 1: Open up QMix-UC and click on the mixer

Step 2: Click the Cog icon on the bottom

Step 3: Give the device a "Nickname" and hit return and then click apply

Step 4: Open up the permissions section of the StudioLive and apply the connected devices permissions, there you will now see the name of the connected device. 

This will only have to be completed once and Universal Control will populate the Nickname when its connected again.