Knowledge Base


StudioLive AI - Why do my fader Movements have no effect on audio?

Updated 11/4/2020

  • Verify that your StudioLive is not locked by navigating to Page 4: Lockout in the "System" Menu.
  • Verify that your StudioLive is not in "Fader Locate" mode. Select "Output" in the Metering Section and verify that your fader movements are affecting the output signal.
  • Make sure your channels are assigned to the Main outputs by pressing [Select] on the channel and checking that [Main] is illuminated (ON) in the "Assign" section of the StudioLive Console.



Please contact PreSonus Technical Support by creating a Support Ticket at for further assistance.

>How to create a support ticket<

Was this article helpful?
1 out of 2 found this helpful
Powered by Zendesk