Knowledge Base

Follow

Studio 1824c and 1810c: How-To Revert to Factory Default Firmware

Published May 26, 2021

 

This can be done easily on the Studio 1824c/1810c itself. There is no need to reinstall an older version of Universal Control to downgrade or revert to an earlier version of firmware. 

To revert the Studio 1824c/1810c to Factory Default:

  • Turn off the 1824c/1810c
  • Turn it back on and just after the LEDs initialize, tap the Line button quickly 5 times.

1824c_Reset_Line_x5.jpg

  •  The Studio 1824c/1810c will then reset. 
  • Connecting it to Universal Control will show Firmware v2.50 for the 1824c and v2.51 for the 1810c)

1824c_firmware_update.png

 

You can now update the firmware to the latest version.

 

==============================================================

Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus.com for further assistance.

>How to create a support ticket<

 

 

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk