Knowledge Base

Follow

StudioLive Series III Rack SD Card Recording and Playback

Reviewed Nov 6 2020

Before proceeding please be sure your firmware is updated on your StudioLive and that you are using the latest Universal Control:

StudioLive Series III Console - Firmware Update

StudioLive Series III Rack mixer - Firmware Update

Universal Control:

https://www.presonus.com/products/UC-Surface/downloads

==============================================================

 

The Series III Rackmount mixers are capable of recording 2-channel stereo audio to an SD card.

 

When the SD card is inserted in the mixer, you will see the Capture logo appear in Universal Control.

Capture_Icon.jpg

 

Click the logo to enter the Capture menu.

Capture_Menu.JPG

 

Click the ‘New’ button to create a new Capture session. Here you can add entries for Artist, Performance and Location.

Capture_Labels.JPG

Once you have created a session after customizing any of these fields, UC Surface will save them for future use. So, for example, if you would like to create another session for an artist, you can click on the pull-down menu to the right of the customization field and simply select it from there.

 

Click create to see the transport controls. Here you can choose the mix you want to record be it Main left and right, one of the flex mixes or subgroup pairs.

Capture_controls.JPG

 

When you hit record, the transport counter will begin to move. On the front of the mixer, the record led will light up red while the play led will light up green.

To stop recording, click the lock then click the stop button.

 

To playback your audio, you will need to change the input of the channel or channels you wish to receive audio from the SD card.

Select the channel and click the gear next to the name of the channel to get to the channel's setting section. Then click the input drop down menu and set the input source to SD Card.

Capture_SD_return_settings.jpg

 

Once the playback channel is selected, click the Capture icon to get back to the transport controls. When you click the play arrow, the transport counter will begin to move and the play led on the front of the mixer will light up green.

 

If you have already recorded a session and are wanting to load it to play it back, you will click the Capture icon, select the session you would like to play and then click load. *Note* You do not need to select 'Load Mix'.

 

For SD card recording, the StudioLive Series III mixers will require SDHC - Class 10 - U3 cards. See the article below for more information on SD cards.

 

https://support.presonus.com/hc/en-us/articles/115000921126-Recommended-SDHC-Cards-for-Multi-track-Recording

 

==============================================================

Please contact PreSonus Technical Support by creating a Support Ticket at My.PreSonus.com/Support for further assistance.

>How to create a support ticket<

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk