Knowledge Base

Follow

StudioLive Series III 1.9 Firmware Update - Universal Control Version 2.8

New In Series III Firmware 1.9 Release:


Fixed In This Release:

  • Potential Console control panel crashes for some users under certain conditions
  • Potential SD Card crashes for some users under certain conditions
  • Soft-patching across AVB streams now works as expected
  • Console remote preamp control over Rack Mixer in Monitor Mix mode now works as expected
  • DAW Mode now works with all supported Studio One languages
  • Series III Rack Mixer metering now working as expected in UC Surface
  • Gain Reduction meters now shown as expected in UC Surface for Buses
  • 6-band Fat Channel EQ High Shelf button now works as expected
  • Console Solo PFL switch now responds instantly

Universal Control 2.8 is the required accompanying software release for this firmware update. You can get it from your mixer's download page on PreSonus.com.


Known Issues:

  • No FET Comp Input/Output Link Button
  • EQ and Comp order and switching are broken for Matrix mix buses
  • Currently selected/adjusted Parameter Value display names need improvement
  • If issues are experienced loading Scenes created on early firmware versions, it may be
    necessary to rebuild them

 

 

Universal Control 2.8 Milestone Release Notes                                                                      

Version Information:
● Universal Control (Mac/PC) - 2.8.0.48221
● UC Surface (iOS/Android) - 2.8.0.48221
● QMix-UC (iOS/Android) - 2.4.0.25212
● Capture (Mac/PC) - 2.4.0.48221


New In This Release:
● Support for FaderPort and FaderPort Classic in Universal Control
● Support for Studio 2/4
The Following Android devices should be Compatible with UC Surface:
● Any device running Android 5.0 or later with a minimum screen resolution of 1024x768
The Following Android devices should be Compatible with Qmix-UC:
● Any device running Android 5.0 or later
NOTE: It is not possible to qualify all devices that support Android 5.0 or later. Any device running
Android 5.0+ should work, but support and functionality may vary. 1024x768 resolution required for UC Surface.

 


The Following iOS devices are Compatible with UC Surface (running iOS 9.3.5 or later):
● iPad (2nd generation)
● iPad (3rd generation)
● iPad (4th generation)
● iPad Mini
● iPad Mini 2
● iPad Mini 3
● iPad Mini 4
● iPad Air
● iPad Air 2
● iPad Pro


The Following iOS devices are Compatible with QMix -UC (running iOS 9.3.5 or later):
● iPhone 4S
● iPhone 5
● iPhone 5C
● iPhone 5S
● iPhone 6
● iPhone 6 Plus
● iPhone 6S
● iPhone 6S Plus
● iPhone SE
● iPhone 7
● iPhone 7 Plus
● iPhone 8
● iPhone 8 Plus
● iPhone X
● iPod touch (5th Generation)
● iPod touch (6th Generation)


UC 2.8 Supports the following Operating Systems:
● Windows 7 x64 Service Pack 1 + Platform Update
● Windows 8.1 x64
● Windows 10 x64
● OS X 10.10 (Yosemite)
● OS X 10.11 (El Capitan)
● OS X 10.12 (Sierra)
● OS X 10.13 (High Sierra)


Capture 2.4 is compatible with the following PreSonus Hardware and Software:
● StudioLive 16.4.2 classic
● StudioLive 24.4.2 classic
● StudioLive 16.0.2 classic
● StudioLive 16.0.2 USB
● StudioLive 16.4.2AI
● StudioLive 24.4.2AI
● StudioLive 32.4.2AI
● StudioLive RM32AI
● StudioLive RM16AI
● StudioLive RML32AI
● StudioLive RML16AI
● StudioLive AR8
● StudioLive AR12
● StudioLive AR16
● StudioLive AR22
● StudioLive 32 Series III Console Mixer
● StudioLive 24 Series III Console Mixer
● StudioLive 16 Series III Console Mixer
● StudioLive 32R Series III Rack Mixer
● StudioLive 24R Series III Rack Mixer
● StudioLive 16R Series III Rack Mixer
● UC Surface 2.8

 


Fixed In This Release:


UC Surface
● Contrast improvements in options dialog with light theme


Quantum
● SPDIF now updates incoming clock source as expected

 

Known Issues:

UC Surface
● Control and metering on UC Surface instance connected via Firewire may exhibit lag on some
systems
● Copy, Delete, & Rename Local Scenes for Cascaded AI mixers not functioning as expected

AI/RM Mixers
● Fat Channel Reset Button Does Not Reset the HPF (or LPF)
● FX issues with Cascaded RM/RML mixers
○ UC Surface and CS18 not controlling some of Slave mixer’s FX Bus settings (volume,
mute, Pre/Post)
● FX Preset list does not update automatically when selecting FX Busses (must exit FX and return to update preset list)
● FX Bus Master is missing HPF control
● Restoring a Mixer Backup over Firewire is not possible.
○ Must be done over Network connection
● Auxiliary Firewire Input 52 driver label is incorrect
● Users on OS X 10.8.5 may experience a firewire driver installation issue (to be fixed in UC 2.5)
● Solo level missing from Settings page
● Channel Type and Channel Color not persistent or shared across clients
○ Not implemented in firmware yet

DAW Mode
● When viewing a send or cue mix, send labels should be placed in the scribble strips
● Incorrect preamp gain range on mixer display when using TRS inputs
● Meters don't match between DAW mode and Mixer mode
● Channel parameters may not populate in Fat Channel after opening song
● Series III Automation Control: Bypass Button Not Present
● Newly added Plugin not automatically selected and controls not on FatCh Encoder section if
another Plugin wasn't already selected when adding the new Plugin
● Talkback Button Does Not Light Up In UCS When Engaged From S1
● Channel Input Does Not Have Selection For "None"
● Unity Fader Value Is Not Accurate
● There Is No Way To Remove A Channel Insert
● Write Select Channel Should Turn Red Like FaderPort 8 & 16
● Pressing Inputs layer button should open Inputs section in S1 Console
● Adding Send while viewing Sends view doesn't update fader level
● Select Buttons For Multi-Channel Instrument Outputs Do Not Light Up

Series III Mixers
● EQ and Comp order and switching are broken for Matrix mix buses
● Solo PFL switch is too slow
● Currently selected/adjusted Parameter Value display names need improvement
Capture
● Playback routing incorrect with cascaded classic StudioLive 16.4.2 consoles
Studio 192 Series
● Preamp and Phantom Power settings may not be retained on power cycle.
StudioLive AR Mixers & Studio 2|6, 6|8, 18|10, 18|24
● Virtual Loopback also records analog inputs, workaround is to use Mix 1/2 option.

 


Join our community of PreSonus users on the PreSonus Answers site for information and product
support. While you're there, don't forget to vote for your favorite feature requests.
Alternatively, you can visit our Knowledge Base for more informative articles authored by the support
staff. To log a support ticket or contact technical support, please visit MyPreSonus

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request
Powered by Zendesk