Knowledge Base

Follow

iPad Pairing with Eris E3.5BT or Eris E4.5BT Speakers

10 Nov 2020

 

Bluetooth Pairing with Eris E3.5BT or Eris E4.5BT Speakers and iOS for iPad Devices

1. From your home screen, select the Settings app.

 IMG_0258_u.png

2. From the Settings screen, select Bluetooth.

3. In the Bluetooth Settings screen, move the slider to the right to enable Bluetooth. 

IMG_0259_u.png   

4. Your iPad will display a gray Bluetooth icon next to your battery indicator now that you've enabled Bluetooth.

 IMG_0260.PNG

5. Press and hold the Pair button for three seconds on the the rear panel of the Eris E3.5BT or Eris E4.5BT. The Power/Bluetooth LED on the front of the active speaker will flash, indicating pairing is active. On your Bluetooth device, select Eris E3.5 BT or Eris E4.5 BT. This will make the device discoverable by your iPhone or iPod Touch. Once your Eris speakers are paired, the Power/Bluetooth LED will illuminate white.

Screenshot_2020-10-30_at_10.21.04.png

6. Your iPad will automatically detect and display your Eris E3.5BT or Eris E4.5BT speakers on the Devices list. 

ipad_BT_.jpg

7. Select the entry on the Devices list for your Eris E3.5BT or Eris E4.5BT speaker to start pairing.

ipad_2_.jpg

8. Once pairing is complete, your Eris E3.5BT or Eris E4.5BT speaker is ready for use. A Bluetooth icon will display in solid black next to your battery-level indicator. Press the Home button to exit Bluetooth setup. 

ipad_3_.jpg

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk