StudioLive AI Mixers - SL Remote AI/Qmix AI - iOS Device Permissions
StudioLive AI Mixers - SL Remote AI/Qmix AI - iOS Device Permissions
Before setting up your iOS device permissions, make sure to setup your network and read the overview for the Networks connection types on your StudioLive AI mixer:
Firmware versions that are compatible with this release:
StudioLive XX.4.2 AI = Firmware version 1.0.5646 or below.
NOTE: If you are using a firmware above 6188, please go to this page to download and install UC Surface and set permissions. Please note that iOS devices at any time must use version 7.0 or greater. The latest iOS release from Apple is always suggested on devices running through mixer firmware.
iOS Application:
SL Remote AI: 1.2.0.22342 or lower
Qmix AI: 1.2.29258 or greater
***If you are using Firmware and application builds that are greater then the ones expressed above, please see these instructions.
Controlling your StudioLive remotely with StudioLive Remote-AI for iPad or QMix-AI for iPhone/iPod touch allows you to move about the venue freely. However, it can also put the full power of the StudioLive in multiple hands—some more adept than others. Therefore, your StudioLive enables you to limit each iOS device’s access to the mixer features by setting permissions.
Once an iOS device is connected to your wireless network and has launched SL Remote-AI or QMix-AI, the device will be displayed in the Remote Devices list on the System Menu on your StudioLive. Each device will be listed using its device name so you can easily identify which device is which.
This name can be changed in iTunes or in the General>About settings on the iOS device.
Once you have connected and configured an iOS device, the same permissions will be set for that device every time you connect it. Complete information about SL Remote-AI and QMix-AI can be found in Sections 5 and 6.
Note: You must give permission to an iOS device from the StudioLive System menu in order to remote control your StudioLive AI-series mixer from that device. Seethe link below for more information on the mixers connections and settings.
2. Look for the mixer in your "SL Remote Ai" or "Qmix Ai" application on your iOS device, click on "Connect":
****If you do not see your devices listed here, make sure you are connected to your network with these instructions
SL Remote Ai Start Page:
Qmix Ai Start page:
3. Press the System button on your StudioLive to launch the System menu.
4. Page down to navigate to "Page 3: iOS Setup."
5. Use the Value encoder to scroll through the list of available iOS devices.
6. When you find the device for which you’d like set permissions, use the Next button to navigate to the first permissions field. Use the Value encoder to set the device permission.
StudioLive Remote Ai for iPad Permissions Overview
When setting permissions for SL Remote-AI users, you will choose between giving full access to all SL Remote-AI functions or providing limited access to just a few aux-mix functions. In most cases, one iPad will be configured as front-of-house (FOH), and the others will be configured as aux mixes.
Mix Permissions Set the level of functionality in SL Remote-AI.
None. QMix-AI on the select iPad will not be able to control your StudioLive AI mixer.
FOH. Enables all SL Remote-AI functions.
All Auxes. QMix-AI will control the channel send levels for all aux mixes.
Aux 1-14/10/6. QMix-AI will only control the channel send levels for the specified aux mix.
Other Permissions. Choose between Ch Rename or None. Ch Renameallows SL Remote-AI users to remotely change the channel and busscribble-strip labels. These changes are also reflected in VSL-AI, Qmix-AI, and on the Channel Info page on the StudioLive AI Mixer.
QMix-AI for iPhone/iPod Touch Permissions
When setting permissions for QMix-AI users, you will choose between providing full access to all aux mixes, providing access to only a single aux mix, and limiting the user to just the Wheel of Me functions.
Mix Permissions Set the level of functionality in Qmix-AI.
None. QMix-AI on the select iPad will not be able to control your StudioLive AI mixer.
All Auxes. QMix-AI will control the channel send levels for all aux mixes.
Aux 1-14/10/6. QMix-AI will only control the channel send levels for the specified aux mix.
Other Permissions. Choose between Wheel Only or None. Wheel Only disables the Aux Mix page in QMix-AI. When this is enabled, the user will only be able to use the Wheel of Me on the single aux to which you’ve provided access. When Wheel Only is enabled, you can only give access to one aux mix.
