StudioLive XX.4.2 AI - Connecting iOS devices to Networks
Connecting your iPad to your Network
1. Tap on the Settings icon in your iPad.
2. Tap on “General.”
3. Tap on “Network.”
4. Tap on “Wi-Fi.”
5. Under “Choose a Network,” find the same network you saved
on your StudioLive from the list. Tap the network to select it.
6. Enter the password when prompted and tap, "Join."
***To make your device Join this network every time, make sure
you select the following options.
7. Tap on the menu arrow to the right of the desired network’s
name to open its network settings.
8. Turn Auto-Join to “On.” You are now ready to launch
StudioLive Remote-AI and mix on the go!
*******************************
Connecting your iPhone/iPod touch to your Network
1. Tap on the Settings icon in your iPhone/iPod touch.
2. Tap on “Wi-Fi” making sure it is set to “On.”
3. Under “Choose a Network,” select the same network you
saved on your StudioLive from the list.
4. Tap on the network to select it. And enter the password.
When prompted tap, "Join."
*********************************
NOTE: Some router models have a feature which tells connected devices when no internet connection is preset upon connection. iOS usually sees these WiFi networks as Captive Wi-Fi networks, and it has an Auto-Login feature for networks that offer this capability (i.e. similar to a hotel or airport wifi login, etc.). The default iOS network setting for a Wi-Fi network with no internet connection is to try and Auto-Login, and it will give you a prompt to do so when you connect. If you don't want the login nag screen, or to have to choose "Connect without an internet connection" every time, then you have to turn off Auto-Login on your iOS device.
See here for more info and examples:
http://support.apple.com/kb/HT3867
http://toddheffley.com/wordpress/wp-content/uploads/2011/01/Obtain-Auto-Login-iOS-6.1.pdf