Knowledge Base


Pro Tools i/o limitations

Technical Support receives questions every so often about Pro Tools i/o issues and/or limitations.  After some research we’ve determined that:

  • A Pro Tools 9.x, 10.x, and 11.x installation (Native) is limited to 32 i/o Channels (maximum).
  • Avid only supports the i/o on a single interface/driver.
  • There are situations where PT users have over 32 channels of i/o available and Pro Tools will not launch until the inputs in excess of 32 are disabled.
  • i/o must be recognized by the system as being a single interface (aggregate devices in Macs “may” work, but this is not a supported method)

The following link will explain some differences between versions of Pro Tools:

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk