Knowledge Base

Follow

FaderPort Classic - How do I set up my FaderPort Classic in Cakewalk / BandLab Sonar?

This article applies to this model FaderPort:

PreSonus_FaderPort_Classic.png

How do I set up my FaderPort Classic in Cakewalk / BandLab Sonar?

Once you have run the Faderport Classic Control Installer and connected your FaderPort Classic, launch Sonar to set up the FaderPort Classic as a native controller.

----------------------------------------------------------------------------------------------------

1. In Sonar, go to Edit > Preferences > MIDI > Devices and check Faderport for both the Input and Output section

1-MIDI_Devices.JPG

 

2. Next, go to the Control Surfaces section and click the yellow star to Add a New Control Surface

2-Prefs-Control_Surfaces-New.PNG

 

3. Select PreSonus FaderPort as Controller/Surface.

3-Select_Presonus_Faderport.PNG

 

4. Select Faderport for both Input Port and Output Port. Click “OK” and close the window.

4-Input_and_output_ports.PNG

 

5. Go to the MIDI > Playback and Recording section and make sure both "Key Aftertouch" and "Channel Aftertouch" are checked.  Click “OK” to close the window.

5-Playback_and_Recording.JPG

 

Your FaderPort Classic is now ready to use. Enjoy!

Was this article helpful?
3 out of 5 found this helpful
Have more questions? Submit a request
Powered by Zendesk