Knowledge Base

Follow

[2b] Studio One 3 : Register New Hardware and Download Installer

* New Customers: BEFORE INSTALLING ANY SOFTWARE! Please make sure your computer meets or exceeds the current minimum system requirements.

StudioOne Version 3 Specifications

* Make sure to also register your PreSonus hardware in your user account after account creation as some hardware product lines that have StudioOne bundled in with them will release the StudioOne software that is bundled with your hardware into your account automatically under the My Products section of your account once that hardware is properly registered.  

 

1. Go to the website http://my.presonus.com and log into your user account. Select "My Presonus", then click on "Register a Product" (yellow button).  

PressRegister.png

 

2. The "Register a Product" dialog box will open with a drop down option. Click the "Hardware" option in the drop down menu.

registerHardware.png

Here you should register your software and/or hardware that came with your purchase. In many cases the hardware registration will release the software that comes bundled with your purchased hardware.

registerHardwareForm.png

NOTE:  Some products will not have Studio One software inside of the box and is supplied when the moment your Hardware is registered.  If you can not find or locate a 28 digit code for Studio One registration, please register the serial number for the hardware that came with your purchase.

  • Hardware registrations (For software Registration) - Locate the serial number that came with your product. Select Hardware in the registration drop down and enter the purchase date and the serial number, read and check off the End User License Agreement, then hit "Register". Again, many of our product lines will release bundled software in your account once the hardware has been registered.
  • Where can I find the serial number? - Typically this will be found on the bottom of the unit (mixers, interfaces, preamps, channel strips, monitoring products) or back (monitor and PA speakers), the serial number is also found on the registration card that came in the packaging with the unit.

3. Once you have correctly entered the Product Key and clicked on "Register" to redeem this registration, The "Your Product has been successfully registered!" message will appear.

Click "View Your Product" to see the newly registered hardware that will now appear in your account.

hardwaveView.png

 

The following example screenshot shows the successful registration page of the AudioBox iTwo. 
HardWareSuccess.png

 

Click on the "My Products" link to view the categories for the products registered in your account. 

AlternateDownload2.png 

3. Use the "Hardware" button in your user account to view your registered hardware listings. 

hardwareTab.png

4. Use the "Software" button in your user account to view your registered software listings. 

softwareTab.png

 

Download and install Studio One on your computer:

-  [2c] Studio One 3 : Software Install Studio One 3 (PC)

- [2d] Studio One 3 : Software Install Studio One 3 (OS X)

Was this article helpful?
8 out of 8 found this helpful
Have more questions? Submit a request
Powered by Zendesk