- Once in your account, locate the column on the right-side of the screen labeled "My hardware". Please select the "Register new Hardware" button and register your hardware now. (if your hardware is already registered in your account, then skip this and move to next step.)
*This is required to enable Capture to appear.
- Your device should now be found under the "My Hardware" section of your User Account. If it is not, go to "Hardware Warranty Registration" and register your product.
- After you register your mixer go back to "My Hardware", click on "see all details" and you will see the list of available software for your board. The Capture software will be listed under your StudioLive mixer.
*Please be aware of system requirements for each Version of Capture, your hardware, DAW, and drivers. The largest minimum system requirements out of the collective is the one to go by. If you do not adhere to this, you most likely will experience some issues or failure, due to not meeting the needs of the software/drivers to run.